29-Inch

Top Choice for rookies. A first-class tire combination. Rapid Rob uses the former Racing Ralph profile. An excellent XC tire which is perfectly suited for use on the rear wheel. Tough Tom, using the previous Nobby Nic profile, is the right choice for rougher trails or for the front wheel.

The old dream pairing reunited. Rapid Rob uses the former profile of Racing Ralph and for many years it has proved an attractive entry-level model. - K-Guard: Consists of natural rubber and is reinforced with KEVLAR fibers. Together with the 50 EPI carcass, the tire is well protected against punctures. - Wire Bead

- World Cup level performance - A tread pattern designed to handle a mixed variety of terrains which you normally encounter on XCO courses: from man made technical sections to natural terrain, from hardpack to loose conditions. - The RC is designed for the racer who seeks maximum speed knowing how to maximize control of his MTB while racing. - All with a high level of reliability for a longer lifespan from the SmartGRIP Compound.

The Aspen is a lightweight XC tire that is designed to roll fast and still provide enough traction to keep you going when the trail gets rough. - Low profile tread design rolls fast and still delivers grip for climbing and braking - Aggressive side lugs dig into soft terrain to provide additional cornering traction - Intended use: hardpack, loose over hard, medium - MaxxSpeed features a high-silica content compound that reduces rolling resistance while also enhancing wet traction - EXO casing provides protection on sidewalls for extreme cut and abrasion resistance while remaining lightweight and highly flexible - Team-spec tires feature a lighter, faster, and more supple 170 TPI casing for the lowest weight possible, with a reduction in durability

High-volume casing, low-profile tread - Aggressive side knobs - Dual Compound - Lightweight XC race tire - Race-inspired low profile design Maxxis has done it again with its latest XC race tire. The new Maxxis Aspen pushes the limits of a lightweight XC tire designed to have minimal rolling resistance. The Aspen is designed with a high-volume casing to smooth out the roughest roots and rocks, while the dual compounds give optimal traction in the corners. So, if crossing the finish line first is your top priority, then the Aspen was designed for you.

The Assegai tire is designed primarily for downhill racing and aggressive trail riding in mixed conditions. The knob height falls between the Minion DHR II and the Shorty. Like the Minion tires, the center knobs are heavily ramped on the leading edge to reduce rolling resistance. A small knob located between the center tread and side knobs provides a smooth transition while cornering. The Assegai offers predictable traction, even over slippery roots and rocks. - World Cup Champion Greg Minnaar's signature tire - EXO casing provides protection on sidewalls for extreme cut and abrasion resistance while remaining lightweight and highly flexible - Wide Trail (WT) construction optimizes the tire’s tread layout and profile on today’s modern, wider rims, optimized around a 35mm inner width

Designed for speed, revised for control - Open-side knob design for versatile cornering - Tightly packed center knobs for speed over hardpack The CrossMark II improves on the speed of its predecessor while improving grip in intermediate conditions. The legendary center ridge still flies on hardpack, and the updated tread pattern provides better braking and cornering over a wide range of trail conditions. A great choice if you want to go fast everywhere.

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

Designed in conjunction with Aussie DH racer Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear depending on trail conditions.

The Maxxis Forekaster features a spiky, well-spaced tread pattern that is ideal for XC racing or light duty trail riding in loose or wet conditions during the spring and fall. Use as a front paired with an Aspen or Ikon rear for an “aggressive” XC setup.

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The Rekon is a light duty trail tire designed to go fast in technical terrain.

- Gen 2 Revised tread pattern - New knob layout based on feedback from World Cup DH and EWS riders - "Doublewide" knob now split into two individual knobs - More supportive cornering knobs - Additional siping to enhance braking and cornering traction - Raised ridges on casing to promote mud clearing

Stare down rough terrain with this burly yet sleek tire. The Utility Player offers comfortable off-road exploration with modern, openly spaced treads and wide 2.25-inch casing. A broad spectrum of diameters gives you choice for fit. You still standing there? - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

- The everyday tire for smooth, fast riding on hard packed terrain - Inspired by racing technology - Tread pattern inherited from the MICHELIN Force Racing tires to ensure smooth and fast riding

This versatile competition and trail tire is comfortable and sure-footed in the turns. It has good grip and is available with various technologies. - Smoothly rolling tire that adapts to any terrain with its special tread - Suitable for E-Bikes

From Rural to Urban Ruban is the energy-saving SUV all-rounder that gets you to both Rural and Urban. It's your partner for your commute, running errands, and the weekend tour. PureGrip Compound—The advanced new compound Based on activated silica compounds, this technology was originally intended as a performance level compound, but after intensive development at our Korbach Research and Development Department Facility, an advanced new compound with outstanding grip and cross-country properties was developed. This new rubber mix, given the self-explanatory name "PureGrip", is ranked just behind our BlackChili Compound and is being used in our performance products both in the road and mountain bike sectors. While providing great grip, it is also long-lasting and highly durable—both characteristics of Continental tires, which are exclusively manufactured in the factory in Hefei (Asia). ShieldWall System The ShieldWall system combines the optimum combination of high puncture protection and low rolling resistance with low weight. This is made possible by an additional, all-around puncture protection layer, which consists of a finely woven cross fabric. This gives the tire a high resistance to punctures and damage. Despite its additional ply, the tire has a very good damping property and a high degree of flexibility to adapt perfectly to the ground. The revolutionary tubeless-ready bead allows easy and uncomplicated mounting of the tire. For best results in sealing and in use, we recommend the use of the new Continental RevoSealant sealant. E25—Suitable for E-Bikes For our E-Bike tires, we relied on over 100 years of experience with moped and motorcycle tires. All of our city/trekking tires are rated to a standard speed of at least 25 km/h. Those tires marked e50 are also certified for S-Pedelecs. With their high-quality structure, puncture protection is high and the rolling resistance is low, offering protection from premature wear brought about by the additional driving force.